LOT 1A

SPLICE BOLT TABLE

SPLICE

BOLTS

PLATE SIZE CLEAR TO F.F.

PLATE SIZE

A

(8) 3/4 X 3 A325T

10'-5 1/2"

6" X 3/8

N/A

01/10/2022 06:40:50am

B

(8) 3/4 X 3 A325T

10'-5 1/2"

6" X 3/8

6" X 3/8

AJ0041

(972) 524-5407

(972) 524-5417 FAX:

FBC20

PHONE:

B

A

AJ0050

PORTAL FRAME CROSS SECTION AT LINE B (OFFICE) DRAWING TITLE

13'-0"

11'-8"

PROJECT NAME EMS - Phase II

T21V0558A ADDRESS

CUSTOMER NAME SIENNA CONSTRUCTION DRAWING STATUS FOR CONSTRUCTION Baton Rouge, LA 70807 4060 T.B. Herndon Avenue

# RELEASE / REVISION DWN / CHK ENG DATE 0 PERMITS CM / ATS BMO 10/05/2021 1 Finals BTW / TJF 01/06/2022 E16 SHEET HAE

JOB NUMBER

11 7/8"

11 7/8"

6 1/4"

9

8

20'-11"

FOR COLUMN AND RAFTER MARK NUMBERS, SEE MARK NUMBER PLAN. Notes:

PORTAL FRAME CROSS SECTION AT LINE B (OFFICE)

(2) INDICATES THAT FLANGE BRACING IS REQUIRED ON BOTH SIDES OF THE FRAME LINE.

PROVIDED, AS REQUIRED, FOR THIS FUTURE CONDITION. THE OPPOSITE SIDE FLANGE BRACEWILL HAVE TO BE INSTALLED AT THE TIME OF EXPANSION. THESE FLANGE BRACES HAVE BEEN FOR EXPANDABLE ENDWALL RIGID FRAMES, IF FLANGE BRACING IS REQUIRED ON BOTH SIDES (2) OF AN EXPANDABLE ENDFRAME,

01/ 18/ 202 2

IF (2) IS NOT INDICATED, ONLY ONE FLANGE BRACE IS REQUIRED AND CAN BE LOCATED ON EITHER SIDE OF THE FRAME.

UNLESS INDICATED BY THE "*" SYMBOL. "*" INDICATES THE LONG SIDE OF THE INTERIOR COLUMNS. COLUMNS AT THE RIDGE ARE TYPICALLY "FLAT-TOP" COLUMNS,

FLANGE BEFORE THE HOISTING EQUIPMENT IS RELEASED. RIGID FRAMES SHALL HAVE 50% OF THEIR BOLTS INSTALLED AND TIGHTENED ON BOTH SIDES OF THE WEB ADJACENT TO EACH